6 Optional principle about welding positioner_Company News
HomeCompany News

6 Optional principle about welding positioner

If you want to buy welding positioner, we must know how to choose a method of welding positioner only carefully selected welding positioner for our chance to be even greater. Choose economical welding positioner or rotating type welding positioner from the use of aging of departure:


welding positioner


1) Weight welding positioner weldment, weldment in the center of gravity away from the work table, eccentricity should be within the range of the data load diagram or positioner carrying the table, and have a certain capacity.

2) If welding positioner is used for welding girth weld, should be based on the rotation of the groove weldment tannins and welding speed conversion of the rotary table speed, the speed should be adjusted within the range of speed positioner Also, pay attention to the smooth functioning of the workbench is able to meet process requirements.

3) If the outer welding positioner weldment profile large size, you need to consider when you tilt table inclination angle so that the weldment meets the requirements of the best in the welding position; if this occurs at an inclination angle with the ground weldment phenomenon of the contact, if this phenomenon occurs, then in addition to the choice of a larger ground clearance table positioner, it can also be used to increase the height or a way to set the foundation pit to solve.

4) The welding positioner if you need to install pneumatic, electromagnetic clamps and cooling facilities, should the manufacturer / merchant made coherent, then electricity, then water requirements.

5) Welding positioner with welding current should be greater than the weldment welding process required for the maximum welding current.

Hope that the election enough above principles welding positioner, it is possible for you to select welding positioner reference. We need welding positioner, want to learn more knowledge of welding positioner, concerns us is a good choice.




Wuxi OLIVET Machinery Equipment Co.,LTD.E-mail: sales@chinaolivet.cnTel: +86-510-8383 0908

HomeAbout UsProducts Quality Control Company News Contact UsSitemap

Copyright©2015 Wuxi OLIVET Machinery Equipment Co.,Ltd. All Rights ReservedTechnical Support: Reanod

Follow Us